ALKOO Power Bank Carrying Case compatible with MagSafe for Anker 633/622/621/321

Plenty of room for the screwdriver and accessories. Most importantly the charger since the BLACK+DECKER uses a specialized one. I was always worried I would lose my charger because then the screwdriver would be useless. Now it's in a big case along with the accessories. Remember to check the measurements if you want to put it in a drawer.

This can be used for all types of things. It's a nice little box, has a decent hard shell but not super hard. I will be using it for my mini projector and accessories.

I actually ordered this case to house a Battery Jump Starter and its accessories, that I recently purchased. I was worried it might not fit, but the dimensions listed were correct and everything fit perfectly.The interior has a mild felt-like texture, and the case is very stiff and protective. The handle has a rubberized texture and is very comfortable to grab, and the exterior and interior zippers slide smoothly. The internal zippered pouch is very handy, and it holds the cables for my starter with ease.One thing to note, the orange bungie strap in the center of the bottom compartment is not removeable.

I've needed a small electric screwdriver for a while and recently purchased the Black & Decker model BDCSFL20C which is specifically noted as being one of the units that this case was designed for. As can be seen, it fits perfectly. I've got the two bits it came with and the charger in the mesh portion of the case now and will add my entire bit set to that when it arrives. One of my concerns after receiving the electric screwdriver was that it has a proprietary charging connection and I was afraid I might lose it. Being able to keep everything together within this case perfectly addresses that concern. The case is fairly rigid yet padded such that I'm confident that it will protect the contents if dropped off the workbench or similar heights. I like that the handle is stitched both through the zipper an also the case itself which should lead to a lifetime of durability. Nice case, well worth the investment.

This photo shows my previous case being a semi-sturdy ziplock bag. I didn't even realized this case existed until recently, and thankfully I found it. It's just a simple case that stores the driver on one side, and the charger and bits on the other. The driver is held in place with a thick elastic cloth band on one side, and everything else can be placed on the other side within the zippered mesh. Im glad I got it to replace my crappy ziplock bag. If I had one complaint, it would be that it could have been designed slightly thinner, just a minor point....but it's worth noting. Other than that, it is worthy of having, and I'm glad I got it.

I have owned my 3.6 volt Black & Decker power driver for 10+ years. It was a gift from my father-in-law. And despite a great deal of use it just keeps working. But for the past 10+ years it was carried and stored in a soft zippered bag intended to use to pack small laundry items for travel. Not a proper home for such a noble tool.But that's changed now! Now it sits proudly in this very eye catching case, along with its power adapter and a host of bits (in the zippered mesh area). There is a handle on the top of the case, the zippers work smoothly, and it the shell is hard enough to provide protection. I could actually get more things in here easily. But I prefer to know that if I grab this case I'll have everything I need to drive or remove screws. The other tools will just have to wait their turn to get a nice home...

This is a really nice quality and roomy case. I got this to actually house a BLACK+DECKER BDCS50 cordless 4V screwdriver, and it definately fits in there with plenty of room to spare to carry extra bits, a tape measure, and more. I really like that the pocket on the top is zippered and not just a pocket to keep items from falling out, and the stretch band on the open compartment is also nice to keep a large item, like the screwdriver, from immediately falling out on accident.The listing shows the exterior dimensions as 6-1/2 by 7-1/2 inches and that is pretty spot on, though it is the measurements not including the zipper and handle. It shows in exterior height as 3-1/4 inches and that would be if you pressed it down, but it naturally sits at a height of 3-3/4 inches.Interior dimensions are very useful to know ahead of time, especially if you are intending to use the case for something else. So I find them to be the following:The large area is approximately 7 inches by 6-3/16 inches, with a height of 1-5/8 inches.The large zippered pocket is similar at 7 inches by 6-3/16 inches, and a height to the netting of 1-1/8 inches.

nice nice nice nice

This battery pack is just what I needed. It has worked well in charging my cell phone and it is small so it fits in all my handbags.

This case is perfect way to keep everything organized. The case is well made, there is enough room for your cord, charger, and foldable plug. I love the purple (more like a lavender) color. I am very pleased with this product. I definitely recommend it.

A little bulky but great

Bought this and a pink version for both my wife and I to use with our Anker Prime 3-in-1 Charging Stations. It didn’t specify that the new Anker Prime Stations would fit, but we decided to try it anyway. Overall they do fit. A bit snug with the cables and charging bricks but they do fit everything in there. Only thing we decided to do was flip the MagSafe end to face outward to avoid any potential scratches from the charging cable. The material is a bit on the cheaper side and I’m not sure how well these will hold up over time but they’re light and can hold everything we need and they seem to work okay.

This is perfect! My power bank fits nicely; Great color

Nice quality case for my wife’s MagSafe power bank, and cord. It matches her phone and MagSafe battery with the light green color. Not necessary, but she appreciated it. It will make it easy to find in her carry-on bags.

Very well made! I love it. Would buy again

Nice case, beautiful blue! Sadly, it is too narrow for my Anker MagGo Power Bank (10K, Slim) model A1664.I could zip it closed, but took a lot of effort, but it bulges.I read Anker10,000mAh in the listing, but not specific models (my error).Make sure you measure your battery/device first, pay attention to the INTERNAL measurements (they are correct) in the listing.

Tal como lo esperaba

The case is well made and does exactly what it’s supposed to do. It fits properly, protects the device, and feels solid for the price. It’s not waterproof, but that’s expected at this price point. Overall, it’s a straightforward, reliable case and worth it if you just need basic protection.

This fits the matching charger perfectly with enough room to put the needed accessories. Seems durable enough to keep it protected. I love that it matches the charger.

It is very good quality. However, it may be heavier than expected. It is an excellent case, though.

Works great!

The case is very nice! Zipper gets a little stuck sometimes, but it’s small and perfect for holding my magnetic charger!

Perfect

Me encanto mucho el estuche, el color es exacto al de la foto y es muy espaciosa